Home Page
Who We Are
What We Do
Areas Served
FAQ
My Promise
Inspection Request
Home Selling-10 Tips
Privacy Policy

Homeowner Info:
  > Air quality
  > Asbestos
  > Biological Pollutants
  > Common Definitions
  > Conserve Energy
  > Constr. Wetlands
  > EMFs in the Home
  > Home Insurance Tips
  > Lead
  > Mold Information
  > Mold & Moisture
  > Plumbing
  > Private Wells
  > Radon
  > Roofing
  > Septic Systems
  > Termites
  > Water Quality

Renovation:
  > Building a Home
  > Energy Efficiency
  > Foundation Insulation
  > Historic Renovation
  > Log Homes
  > Rehabilitation
  > Stucco

Home Buyers:
  > 3 Mistakes
  > Closing Process
  > Things to Look For
  > Prebuilt Homes
  > What Really Matters


Pete Barnes
PO Box 316
Waterloo, IL 62298
618-975-5524

License #
IL 450.0002799

Certificate #
MO 64482.302324751342


Resources:
ASHI, NACHI,
RASI

Mold Information

Ten Things You Should Know About Mold

1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.

2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.

3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.

4. Fix the source of the water problem or leak to prevent mold growth.

5. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
a. venting bathrooms, dryers, and other moisture-generating sources to the outside;
b. using air conditioners and de-humidifiers;
c. increasing ventilation;
d. and using exhaust fans whenever cooking, dishwashing, and cleaning.

6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.

7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.

8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.

9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).

10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.